IMPORTANT INFORMATION

A pre-construction mock-up is required and must replicate actual job site conditions for the warranty to remain in effect. Samples must be approved in writing for all "non-standard" patterns.

FORMLINER PREPARATION

Use of adequate forming materials/forming system with enough strength to support the weight of the formliner and the concrete is required.

Ensure all formliners are clean and free of any dirt or debris before each use.

Do not use damaged formliners.

Mold release must be applied to formliner, immediately before concrete is poured. Do not use any solvents or solvent based mold releases on formliners. Solvents will mark and deform urethane formliners.

Do not allow formliner temperature to exceed 140 F at any time during use or storage.

FORMLINER STORAGE AND CARE
Proper care and storage of formliners will increase the useful life of urethane formliners.

Do not store formliners in direct sunlight. Sunlight, over time will discolor and degrade urethane formliners. Keep formliners covered to protect from dirt, debris, and UV exposure.

Store formliners in a flat position with adequate support beneath each formliner, do not store formliners with objects pressed into the urethane. Urethane formliners will take a "set" or distort over time, taking the shape of the object pressed against the urethane.

PRODUCT INFORMATION

Not all patterns are detailed on this website. Please contact Fast Formliners, Inc. to discuss custom patterns and for patterns that are not represented in this brochure.

Please call for lead times, availability, quotes and/or samples of our urethane formliners.

Fast Formliners, Inc. currently only manufactures multi-use urethane formliners. Our urethane formliners are designed for 50-100 re-uses with proper use and storage.

Please note that all formliner dimensions are nominal, and may vary due to temperature, design, and depth of formliner.